QZB-50/6Q pneumatic injection pump, ZBQ-50/6 pneumatic injection pump dual fluid injection pump pneumatic injection pump, main technical parameters Model ZBQ50 / 6 type parameter name in the basic parameters of the rated flow L / min 30 , 50, 100 Rated working pressure Mpa the 10,6,3 plasma cylinder mm 60,75,100 stroke length mm 120 reciprocating frequency min-1 2-55 gas pressure mpa 0.6 ~ 0.7 adjust the air pressure mpa 0.05 to 0.6 cylinder diameter mm 250 ventilation straight G1 Compressed air consumption m3/min ≤ 0.7 supporting motor power KW matching motor Model Weight KG 60 Outline Dimensions (L × W × H) mm 1000 × 504 × 645 rows pulp port diameter mm ZBQ-30/3 pneumatic injection pump dual fluid injection pump pneumatic injection pump pneumatic to injection pump ZBQ air injection pump is mainly used for mine, subway, water conservancy construction, water grouting and broken rock consolidation works. Also be used for the face pregrouting depth adapt. The pump can be used for single liquid grouting (grout), double grouts (water mud, water glass) can also be used to transport the viscosity or corrosion is not too great a variety of slurry and water can also be used. Flammable, explosive, intense radiation, and more dust, temperature changes and watering place can be. Second, the characteristics: 1.ZBQ pneumatic injection pump 1) small size, light weight, mobile handling, to adapt to the frequent mobile multi-grouting. 2) As a result of the pneumatic transmission the grouting performance of the pump is ideal for grouting pressure is low, flow, grouting pressure rises small flow conditions. 3) Pneumatic drive flammable, high-explosive, water spray, dust and large working environment may be used. 4) available in the slurry is not very stringent conditions than required for a pump can achieve double grouts, greatly reduce the construction equipment purchase costs. , Working principle, ZBQ pneumatic injection pump compressed air through the ball valve, air source diad 5/2-way valve into the cylinder to promote cylinder piston reciprocating. Due to the cylinder rod and plasma cylinder rod is connected to cylinder reciprocating motion of the piston also promote pulp piston for reciprocating movement is drawn from the pulp action. Commutation by a dial mounted on the cylinder rod, toggle back and forth stroke valve, control commutation cutting transform the direction of the cylinder intake and exhaust, continuous complete the reciprocating motion of the piston. Selection of shows, ZBQ pneumatic injection pump 1) selection of the types of injection pump double grouts order stating Note dual-plasma ratio of 2) supply pressure must not be less than 0.6 ~ 0.7Mpa, gas shall not be less than 0.7m3/min